NEW August 2003: I have launched a new and improved ad system featuring searching, easy editing and deleting of your posted adds, spam protection and better date format. I will leave these old pages here until the new system fills up, please update your bookmarks, the new Ad System is here
Recent Additions
Ad No.: 431 - Subject: Pilot Radio - Posted on: 07/29/03
Reply to: Alan at alan.cavender@bt.com
Wanted: Pilot radio, upright wooden table model with "aeroplane" dial. Working or not.Ad No.: 426 - Subject: WEGA 312 radio - Posted on: 07/28/03
Reply to: L Stephenson at linstephenson@lineone.net
Wanted any info on my late fathers radiogram in a wooden casing about 2 foot long. Are these of any value - my mother would like to sell it to make room.Ad No.: 425 - Subject: Grundig TK 148 AUTOMATIC - Posted on: 07/27/03
Reply to: Alina Arscott at alina@lwcdial.net
I am looking for an old Grundig tape recorder TK 148 Automatic.Ad No.: 424 - Subject: Philco 444 re-cone speaker - Posted on: 07/27/03
Reply to: darren green at darren@motormobility.freeserve.co.uk
Does anyone know where I could get this speaker reconed and obtain a wiring diagram, thanks.Ad No.: 423 - Subject: EDISON BELL TWIN CRYSTAL SET - Posted on: 07/26/03
Reply to: RAY WILLIS at raywillis@eckoad65.free-online.co.uk
EDISON BELL CRYSTAL SET,has anyone out there got a vareyommeter for this twin crystal set,even a broken one that i can repair,i paid a lot of money for this set and when opened up it had an air spaced capacitor in it,could one of you kind people out there help me.will pay a fare price for one MANY THANKS .Ad No.: 421 - Subject: Relays for my nrd 515 - Posted on: 07/20/03
Reply to: Rolf Jansson at 090.52309@telia.com
Hello , I am searching for relays for my jrc nrd 515 receiver type matsushita HB1E-DC12V Do you have these or similar I can use regards RolfAd No.: 420 - Subject: Wanted: R.E.L. "Precedent" mono FM tuner - Posted on: 07/18/03
Reply to: GS Handley at rstytnsp@netvista.net
Wanted in any condition REL Precedent mono FM tuner. thanksAd No.: 419 - Subject: ANY HRO parts/units wanted - Posted on: 07/18/03
Reply to: S. A. WRIGHT at sidsengines65@ntlworld.com
Wanted urgently to complete restoration projects, any HRO receivers in ANY condition or even part stripped units also P/U and speakers also need ceramic valve-holders for HRO urgently, ANYTHING Considered. Thanks SID (G4LBY)Ad No.: 418 - Subject: alba portableradiogram model LP 707 - Posted on: 07/17/03
Reply to: JAMES WILLIAMS at jwilliams@gleesonmcl.com
ALBA PRODUCT. portable suitcase style 50s radiogram creamy pigskin covering handwound turntable 2 plays large radiodail left hand inside turntable to the right mw/lw any one seen one pleaseAd No.: 416 - Subject: NordMende Phonosuper Radiogram - Posted on: 07/15/03
Reply to: Les. at necessarymeasures@ntlworld.com
Does anyone have a circuit diagram or any information showing valve placement for a Nordmende Phonosuper Radiogram. Many Thanks.Ad No.: 415 - Subject: NordMende Phonosuper Diagram - Posted on: 07/15/03
Reply to: L. Borthwick at necessarymeasures@ntlworld.com
Circuit diagram/valve positions wanted for Nordmende Phonosuper Radiogram, not shure of the year of manufacture of this set, any info appreciated. Many Thanks.Ad No.: 411 - Subject: RF GENERATOR WANTED - Posted on: 07/12/03
Reply to: andy Mills at millsaATwaitroseDOTcom
need good quality RF generator which covers from say 100KHz to about 120MHz. Has to be reasonably compact, and have a frequency readout as opposed to a "dial" - Also need to have Freq/Ampl. modulation.Can offer P/exch. T'TRONIX 465A scope + cash TA! Surrey Area -( replace 'AT and 'DOT 'in email address !)Ad No.: 408 - Subject: AVO HF 135 Signal Generator - Posted on: 07/11/03
Reply to: Paul at paul@wireless.ac
Wanted in nice condition AVO Signal Generator HF 135. Up to £50 paid for nice example. Please e-mail me. PaulAd No.: 405 - Subject: Circuit Diagram/Valve Types - Posted on: 07/10/03
Reply to: Les. at necessarymeasures@ntlworld.com
Wanted:- Circuit diagram and valve types for Nordmende Phonosuper U70 Radiogram, or photocopy. Please email me at necessarymeasures@ntlworld.com Many thanks.Ad No.: 404 - Subject: Ultra Coronation Valve mains/battery set - Posted on: 07/09/03
Reply to: Ian Reeve at ian@ianreeve.fsnet.co.uk
I am looking for the two control knobs for this set in good usable condition. One of the knobs was unfortunately cracked and has come away from the section that grips the control shaft.. Any help would be appreciatedAd No.: 403 - Subject: Murphy CV2215 TV - Posted on: 07/08/03
Reply to: Ali Elam at aelam@nyc.rr.com
I am looking for a 1974 Murphy CV2215 colour television set. Preferably white, preferably in working condition, even if "just".Ad No.: 402 - Subject: US PHILCO 89 CATHEDRAL DIAL ESCUTC - Posted on: 07/08/03
Reply to: STEVE SIDAWAY at sparks@tiscali.co.uk
I need a black bakelite dial escutcheon for a Philco model 89 cathedral radio. The escutcheon has to be for an 89 with a DRUM dial rather than a DISK dial - the escutcheons are different. Can anyone help?? Willingly pay a reasonable price plus post etc. or can help with data for British sets.Ad No.: 401 - Subject: Wanted Bush parts - Posted on: 07/08/03
Reply to: Roy at roy@powerup-ele.co.uk
parts needed for Bush DAC90a /90. Also a Bush DAC10 or11 Complete working or not for a refurbishment project.Ad No.: 400 - Subject: Decca equipment wanted - Posted on: 07/07/03
Reply to: D.S. Jones at admin@litramfg.com
Need Decca Navigator marine receiver for historic vessel restoration project in Canada. Can anybody help locate any units, parts or pieces of a Mark5 or Mark12 receiver. If unsure, email me pictures or details for confirmation.Ad No.: 399 - Subject: Pye Mozart HFS20 - Posted on: 07/07/03
Reply to: Stuart Moorse at stuart.moorse@virgin.net
Stereo Valve Amplifier, working condition preferred.Ad No.: 398 - Subject: Marconiphone Recorder drive belt - Posted on: 07/06/03
Reply to: Lawrence Moore at lawrence@earthrod.co.uk
Looking for a drive belt for a Marconiphone four track tape recorder (circa 1955) - anyone out there have any advice??Ad No.: 397 - Subject: medium wave loop aerial - Posted on: 07/06/03
Reply to: jim edwards at edwardslancs@lycos.com
medium wave loop aerial wanted, maximum 30 inch square, commercial or homemade must be well constucted and rotable,cash waiting or would swop for target communications receiver. thanksAd No.: 394 - Subject: Wanted - Posted on: 07/05/03
Reply to: ROY at roy@powerup-elec.co.uk
Bush DAC90A / DAC10 Must be Complete for a restoration project Please call 07905 855614 anytimeAd No.: 390 - Subject: wanted ws19 and ws88 - Posted on: 07/03/03
Reply to: ronald walkerdine at r.walkerdine@ntlworld.com
has any one got a 19 set for sale working or not with or with valves psu case headset variomiter would like it to have a b set in not esential any condition accepted also a ws88 set any version afv ect any 19 set bits boxes ect thans for your time ronAd No.: 384 - Subject: HRO Parts or Complete working or not - Posted on: 07/01/03
Reply to: S. A. WRIGHT at sidsengines65@ntlworld.com
STILL REQUIRE HRO RECEIVERS COMPLETE OR NOT, WORKING OR NOT, ALSO POWER UNITS & SPEAKERS IN FACT ANY HRO ITEMS, COMPONENTS ETC URGENTLY NEED CERAMIC VALVHOLDER (UX6) TO REPLACE BUTCHERED SETS Thanks SID (G4LBY)Ad No.: 381 - Subject: Marconi Receivers - Posted on: 07/01/03
Reply to: Stephen Hayward at stevehayward2002@yahoo.com
I am looking for any Marconi receivers (Atalanta, Electra or Mercury models) in working condition.Ad No.: 380 - Subject: Deforest D-10 Parts Wanted - Posted on: 06/30/03
Reply to: Cdnradio at cdnradio@shaw.ca
Looking for the following parts for a Deforest D-10 Audio's, Plug-in Coils, Crystal detectorAd No.: 379 - Subject: radio dials - Posted on: 06/30/03
Reply to: Mike Horne at mike@jhorne62.freeserve.co.uk
Can anyone make me a replacement glass dial for a Barclay valve radio receiver(made in the mid 1960's)?This set was originally of Yugoslavian manufacture, but there were some exports of this set to the U.K.The dial on my set is broken, but another Barclay set owner has kindly done some scans of the good dial on his set - these scans need joining together in order to be utilised to make up a dial Best wishes MikeAd No.: 377 - Subject: Old car radio - Posted on: 06/29/03
Reply to: bob davis at soundoffbob@aol.com
Looking for a stylish quality 50/60s European set. Dead or alive but preferably complete. Many thanks.Ad No.: 376 - Subject: BSR P207 repairs - Posted on: 06/28/03
Reply to: Chris Jenkins at uhu12456@yahoo.com
My father in law has a Waltham STM-50 with a BSR P207 deck which is not working properly. I would like to have a look at it for him, but have no service/repair instructions. Can anyone helpAd No.: 374 - Subject: Manual/Schematic needed - Posted on: 06/27/03
Reply to: John Syros at johnsyros@hotmail.com
Need Manual/Schematic for: A.P.4, model MkV, British Spy-Tranceiver. Any help will be much appreciated.Ad No.: 373 - Subject: EDDYSTONE EB-35 HF RX - Posted on: 06/27/03
Reply to: RAY WILLIS at raywillis@eckoad65.free-online.co.uk
I AM IN NEED OF A TUNING SCALE FOR AN EDDYSTONE EB-35 HF RX MUST BE IN GOOD CONDITION MANY THANKS.Ad No.: 372 - Subject: buy-sell-trade,radios,guitars,amps - Posted on: 06/27/03
Reply to: steve mikul at musicgear1@aol.com
looking for antique radios and vintage guitars and amps.E mail me with what you have and I will tell you if am intersted. thanksAd No.: 370 - Subject: Searching for a scale of the Ekco A22 - Posted on: 06/26/03
Reply to: NAERT BART at bartnaert@advalvas.be
I'm searching for a scale for my Ekco A22 .Original or Replica , I will pay a good price for it . Thanks a lot .Ad No.: 368 - Subject: Transistor radio wanted. - Posted on: 06/26/03
Reply to: Martin Oliver at lightningrepairs@btopenworld.com
Can anybody sell me a pocket transistor radio from the 1960's or 1970's? The condition needs to be very good working order.Ad No.: 367 - Subject: 6E7 valves wanted - Posted on: 06/26/03
Reply to: S. A. Wright at sidsengines65@ntlworld.com
WANTED, TO COMPLETE PROJECT -- 4 x 6E7 VALVES, MUST BE GOOD These are UX7 base with top cap, also need top cap connectors to fit these valves. Thanks SID (G4LBY)Ad No.: 366 - Subject: heathkit mohican gc-1 info - Posted on: 06/25/03
Reply to: steve N8HHS at myocum@zzzip.net
need a copy of the dial string setup for both the main tuning and the bandspread. email if you can help. 73's n8hhsAd No.: 365 - Subject: Eico Mod #635 tube tester - Posted on: 06/25/03
Reply to: Robert at robertnancy@accesswave.ca
I have tube tester but no paper work to go with it, does anyone have this info. please email me at robertnancy@accesswave.ca thanksAd No.: 364 - Subject: schematics - Posted on: 06/24/03
Reply to: murali at vu2fww@eth.net
schematic for DRAKE MSR 2 Marine communiceation reciever and Harris RF 350 Hf transcieverAd No.: 363 - Subject: Machining jobs undertaken - Posted on: 06/23/03
Reply to: Neil Harrap at nchmachining@aol.com
I am a precision engineer and can offer Turning and Milling services.I can do all small to medium jobs,so please contact me if you require this service or know of anyone that does.ThanxAd No.: 360 - Subject: Philips Superinductance Coil or Can - Posted on: 06/19/03
Reply to: Dick Waddingham at dick@brimpton.demon.co.uk
I am restoring a Philips 634A which has a damaged superinductance coil(the one under the speaker). Can anyone offer either a replacement coil, can, or defunct chassis containing a coil to get this rather fine set working again.Ad No.: 359 - Subject: Old type resistors wanted - Posted on: 06/18/03
Reply to: S. A. Wright at sidsengines65@ntlworld.com
Good selection of old type resistors wanted, the larger size 1/2,1 & 2 watt type requiured for various vintage projects so have a look for that horde of old resistors youve had for years and will never use --- I will buy them SID.Ad No.: 357 - Subject: Bush AC3 info wanted - Posted on: 06/18/03
Reply to: Mike Calvert at michael.calvert2@ntlworld.com
Can anyone help me? i am trying to recreate a Bush AC3(their first set)i built the cabinet many years ago but am having difficulty obtaining any chassis layout plans,i do have a cicuit but need top and bottom chassis views to help with layout. Thanks in anticipation MikeAd No.: 354 - Subject: VHS: "In Search of the Trojan War" - Posted on: 06/17/03
Reply to: Tamson at tamson22@yahoo.com
I am looking for a VHS copy of the 6-part 1985 BBC documentary with Michael Wood. BBC, PBS, History Channel,etc all came up empty. Does anyone have a copy for sale?Ad No.: 353 - Subject: Wanted - 60's VOX/JMI amplifier - Posted on: 06/17/03
Reply to: Glen at glen_3@hotmail.com
In any condition, even a stripped chassis. A 60's AC15 is the model I'm looking for but any other 60's VOX/JMI amp would be of interestAd No.: 352 - Subject: Wanted - 60 Vox/JMI amplifier - Posted on: 06/17/03
Reply to: Glen at glen_3@hotmail.com
In any condition, even a stripped chassis. A 60's AC15 is the model I'm looking for but any other 60's VOX/JMI amp would be of interestAd No.: 350 - Subject: CRYSTAL SETS AND PARTS - Posted on: 06/14/03
Reply to: JOHN HARRIS at FERNDALE@INDORSET.FREESERVE.CO.UK
I AM NEW TO THE COLLECTING OF CRYSTALS SETS AND RADIOS BUT VERY KEEN IF YOU HAVE ANYTHIONG CRYSTAL SET RELATED PLEASE E ME OR TEL 01258---837668 DORSET. AND I WILL BE VERY PLEASED. JOHN DORSETAd No.: 349 - Subject: New Zealand made bakelite radios - Posted on: 06/14/03
Reply to: Jared Morgan at jazzlmorgan@hotmail.com
Have a large collection of radios manufactured in NZ, all in going order and immaculate condition, would like to know if there is any interest in these on overseas markets (ie out of New Zealand) also have some British sets I would particularly like to know the value of a mint Phillips 634A (Ovaltine set).Ad No.: 345 - Subject: Knight Kit KG-620 - Posted on: 06/12/03
Reply to: D.Polson at dpolson@azonline.com
Im looking for a manual for my KG-620 VTVM and also another unit I can use for parts. I need a meter movement for it. If you've seen my previous posts, please e mail me at dpolson@azonline.com with any information. Thanks, Don P.Ad No.: 343 - Subject: TRF Radio - Posted on: 06/11/03
Reply to: maurice woodhead at mauricewoodhead
Hi I am looking for a Champion (or any other) TRF Radio from the 40's or 50's. Condition not important. Thanks MauriceAd No.: 342 - Subject: AR88 Case - Posted on: 06/10/03
Reply to: John Simons at sam@baldeagle.worldonline.co.uk
I am STILL looking for a case for one of my AR88's ! You know the one...sits in the corner, shivering. I can't let it go through another winter in this embarrassing, naked state. Can anyone help, please?Ad No.: 340 - Subject: Pathe 633W - Posted on: 06/09/03
Reply to: Guus at Booster@zeelandnet.nl
I'am looking for any information on this radio, scematic or other technical info.The chassis must be equal to the Marconi typ 6 chassis I'am not sure of this if right. Sorry for my bad english.Ad No.: 336 - Subject: Spareparts for Trio 9R-59D - Posted on: 06/08/03
Reply to: Rolf Jansson at 090.52309@telia.com
Anyone having a Trio 9R-59D as spareparts, I want to buy parts from it! regards RolfAd No.: 335 - Subject: Wanted: 6AD5 valves - Posted on: 06/08/03
Reply to: David Neale at david.neale3@ntlworld
Does anyone have any 6AD5 octal triodes they wish to sell?
These appear to be a bit of a mystery valve; maybe used in radar applications once-upon-a-time.
Need 8, but 4 would be more than acceptable!Ad No.: 333 - Subject: wanted information. - Posted on: 06/07/03
Reply to: mike byrne at mikebyrne@jentune611.freeserve.co.uk
has anyone out there got a circuit for a radford low distortion oscillator series 2 or perhaps the instruction book? Any help gratefully received with thanks.Mike Byrne.Ad No.: 332 - Subject: Turntable Belt/Info for HMV Stereogram - Posted on: 06/07/03
Reply to: Stephanie Walters at stephmikewalters@hotmail.com
Hi
I am trying to get my Dad's HMV Sceptre "80" model TJ-4X turntable working. The radio part and speakers work fine. I think that the turntable belt has been removed (probably broke) and I cannot source belt or info re how it is fitted. Can anyone help....eternally grateful as sound is excellent from memory...Thanks, StephAd No.: 331 - Subject: trio 9r-59d - Posted on: 06/07/03
Reply to: Rolf Jansson at 090.52309@telia.com
Anyone ,Back on the crash ssb-cw mode on my trio 9r-59d, I have also receive a trio from UK but this one have missing parts , and they a diffrent inside but it says 59d ???? How do I know if I can take parts from it and replaced the broken one the ordinary one ??????? regards RolfAd No.: 330 - Subject: trio 9r-59d - Posted on: 06/07/03
Reply to: Rolf Jansson at 090.52309@telia.com
TO Anyone out there I have just received my Trio 9r-59D, and when I switch to ssb-cw there was smoke coming out from the receiver just around the bfo-coil but I can't see any burned parts so I have to measure my way trought the radio,so anyone having the data on the 59D. And futher whem I switch to AM the receiver works well what I can see ,so anyone who can give me a hint what to look for? regards RolfAd No.: 328 - Subject: 3ohm 8 ins round speaker wanted - Posted on: 06/06/03
Reply to: S. AQ. WRIGHT at sidsengines65@ntlworld.com
Wanted for pye domestic --- 8 ins 3 ohm round speaker MUST of course be working price etc: Thanks SID.Ad No.: 327 - Subject: 1920s Wireless Catalogues - Posted on: 06/06/03
Reply to: Ian Sanders at ilsande@attglobal.net
Looking for any 1920s catalogues, especially Ward & Goldstone. I will pay for photocopies...Ad No.: 326 - Subject: Burgoyne Class B3 radio - Posted on: 06/04/03
Reply to: Ron Fairweather at ronfairw@aol.com
Am in the market for a bakelite tuning dial surround (or escutcheon) for this set.I would be happy to take a set in poor order, for parts.Ad No.: 323 - Subject: Marconiphone T29A control knobs - Posted on: 06/03/03
Reply to: c cairns at cairns@telus.net
Wanted: original control knobs for a Marconiphone T29A (1951) or info as where to find, thanks --------------------------------------------------------------------------------Ad No.: 322 - Subject: HRO spares urgently wanted - Posted on: 06/02/03
Reply to: S. A. WRIGHT at sidsengines65@ntlworld.com
ANY HRO spares wanted urgently to complete projects, complete, incomplete. working or not, iether complete units or single items in fact ANYTHING HRO needed - receivers, P/U's, Speakers. Thanks SID (G4LBY)Ad No.: 321 - Subject: Mullard Technical Manuals - Posted on: 06/02/03
Reply to: P.Goulding at paul38g@ntlworld.com
Looking to try and complete my set of manuals.Still in need of numbers:-1A 2 3 4 5,any help greatly appreciated.Thanks in anticipation, Paul.Ad No.: 316 - Subject: valve - Posted on: 06/01/03
Reply to: kenneth jones at kgjones@lineone.net
Looking for valve type VP4 To replace in a recently restored Bush PB63 which of course packed up after all the effort. ThanksAd No.: 315 - Subject: Pansonic RF 5000 repair question - Posted on: 06/01/03
Reply to: Todd Palmquist at todd-palmq@worldnet.att.net
Need info on Panasonic RF 5000-only works on FM and SW8.Ad No.: 310 - Subject: Telefunken/Seimens/TAB VXX modules - Posted on: 05/29/03
Reply to: Graham Dicker at gtd@bettanet.net.au
Looking for circuits and information for early V4x and later model V3XX or V6XX audio modules, I have V72 and V76 information.Ad No.: 307 - Subject: Tuning gang for Grundig Satellit 1400 - Posted on: 05/28/03
Reply to: Mike Izycky at mjizycky@hotmail.com
Has anybody got a scrap Grundig Satellit 1400 they don't want (Unlikely, I know)? I've just bought one at some expense and have discovered the tuning gang assembly is defective - the nylon drive gear has failed. Having spent a lot of money on this radio I really would like it to earn its keep! If you have, contact me at the above address and we'll discuss a price; or failing that, if you want to buy my cosmetically nice 1400 from me you can - but it won't be cheap, I'm afraid!
Regards, Mike.Ad No.: 306 - Subject: Philips BX750A Dial Wanted - Posted on: 05/26/03
Reply to: Ron Kremer at ronkremer@hetnet.nl
Wanted an absolutely unmarked dial (North European Version)for a Philips BX750A. My current dial has a somewhat wrinkled background, probably caused by sunburn or the influence of UV radiation from sunlight. Tnx in advance.Ad No.: 305 - Subject: Grundig Satellit 300 - Posted on: 05/26/03
Reply to: Leif Helge Indrevær at leifindr@online.no
Hi! I need teh Service Manual (or just a schemtaic drawing) of this radio. Thanx in advance for any help!Ad No.: 302 - Subject: wanted GEC AC 38 - Posted on: 05/24/03
Reply to: dave jones at david.jones11@btinternet.com
I am seeking a bakelite GEC AC 38 in mint or near mint condition I live in North Wales so I would wish to purchase in the north west or birmingham areas as I would collect,but I do attend the Harpenden events so could pick up from there. 01745 825004Ad No.: 301 - Subject: wanted garrard 4hf turntable - Posted on: 05/23/03
Reply to: ken passley at dhero@lineone.net
looking for garrard 4hf deck or garrard tone arm from 1957-1965Ad No.: 299 - Subject: PYE 350 - Posted on: 05/22/03
Reply to: Ken Lloyd at MRKJLLOYD@HOTMAIL.COM
I need the large knob, back, and bakelite escutcheon for a PYE 350.Ad No.: 298 - Subject: Vintage RCA Victor Speakers - Posted on: 05/22/03
Reply to: Gwen at cnss5al3z@yahoo.com
Does anyone know where I can locate information on these Vintage RCA Speakers Model XFK23W?? I have been searching everywhere and can't find anything!! Thanks so muchAd No.: 296 - Subject: decca decola stereo - Posted on: 05/21/03
Reply to: philippe at raphiri@aol.com
i need informations about decca decola stereo(ads, manuals, history, production, prices in 1962, today salers, owners, club?, books, where it was produced, how many, why, during how many years, countries where it was exported,photos,...) thank you for the 'frog'!Ad No.: 294 - Subject: HRO receivers/spares ANY CONDITION. - Posted on: 05/21/03
Reply to: S. A. WRIGHT at sidsengines65@ntlworld.com
Wanted, HRO receivers, working or not, complete or not even any spares or HRO single items wanted... to complete restoration projects simply anything considered.... Thanks SID (G4LBY)Ad No.: 293 - Subject: UX4 valves wanted, working or not - Posted on: 05/21/03
Reply to: S. A. WRIGHT at sidsengines65@ntlworld.com
4 UX4 valves wanted, need'nt be working I only need to break them for base for my HRO receivers power leads, so anything will do so long as valve base with pins OK Also need UX4 valve bases - 4 of Thanks SID (G4LBY)Ad No.: 286 - Subject: HF Chokes - Posted on: 05/18/03
Reply to: John Gunstone at jgnst@jgnst.co.uk
Has anybody got any transmitter type High frequency chokes or know where I could find some ThanksAd No.: 285 - Subject: Interstage transformers - Posted on: 05/17/03
Reply to: mark allison at jmallis@blueyonder.co.uk
Anyone got any interstage transformers for sale at a reasonable price?Ad No.: 284 - Subject: Ferranti knobs - Posted on: 05/17/03
Reply to: John at john@mkelly60.freeserve.co.uk
Looking for two knobs for ferranti u1015. Can anybody help?Ad No.: 282 - Subject: Murphy A52 - Posted on: 05/15/03
Reply to: Seth Butt at seth.b@ntlworld.com
I am currently looking for a Murphy A52 push-button motorised tuning radio. Any condition considered. I'd be interested in hearing from anyone who has one of these radios for sale. Thanks.Ad No.: 281 - Subject: avo 163 VALVE TESTER - Posted on: 05/15/03
Reply to: Giovanni at NAMGIO@YAHOO.COM
Hello. I'm looking for an AVO type 160 in good condition. Please mind that the item has to be shipped abroad (Italy) , I pay the shipping rate and insurance of course and I pay by postal money order (1 Wk to receive the money). Please let me know. E-mail: NAMGIO@yahoo.comAd No.: 278 - Subject: old light switches - Posted on: 05/14/03
Reply to: Dave at dh69uk@yahoo.co.uk
Hi I know this is a vintage radio notice board but I cant find a vintage electrical board so can any one help Iam after some old swtches bakerlite or brass on white porcelain complete with woodern blocks also some old ceramic celing roses on woodern blocks can any one helpAd No.: 277 - Subject: PORTABLE RECORD PLAYER - Posted on: 05/14/03
Reply to: KEVIN MCKIE at WICKED@KEVINMCKIE.FSNET.CO.UK
Hello My name is Kevin McKie DISABLED WHEEELCHAIR USER. I AM LOOKING FOR THE FOLLOWING ITEM PLEASE HELP ME DESPARATLEY PORTABLE RECORD PLAYER BATTERY MAINS WITH AM-FM RADIO. IF ANYBODY HAS GOT THE ABOVE ITEM PLEASE CONTACT ME VERY SOON PLEASE. HOME 01782 814945 MOBILE 07940 089363 MANY THANKS MR KEVIN MCKIE.Ad No.: 276 - Subject: Allied 2515a - Posted on: 05/14/03
Reply to: Rolf Jansson at 090.52309@telia.com
Anyone out there having a manual for radio Allied 2515a , regards RolfAd No.: 275 - Subject: Philips 371U back & base cards - Posted on: 05/13/03
Reply to: Mike Horne at mike@jhorne62.freeserve.co.uk
Does anyone have a back card and a base card (in good condition) for the Philips 371U valve radio (made about 1948)? Best wishes Mike HorneAd No.: 274 - Subject: Barclay valve radio - Posted on: 05/13/03
Reply to: Mike Horne at mike@jhorne62.freeserve.co.uk
Hi! Does anyone have a spare dial glass for a radio made by Elekronska Industrija of the former Yugoslavia - model RR230?. It was marketed for export as BARCLAY (but not known in the country of origin as that name). There have even been reports of such a set been manufactured by E.I NIS in Czechoslovakia. I have contacted some people who say that they could make a good scan of their dials, but have not heard any further information on the subject. I am sure that someone in the U.K or Europe has spare parts for this radio? The dial glass on my set has been broken in two sections, which I have now glued together, but of course the join is obvious, and some of the backing paint has peeled off it. The dial has a mention of Radio Caroline on 199 mtrs medium wave on it, which dates it to about 1964. I would greatly appreciate it if anyone could assist me? Best wishes Mike HorneAd No.: 271 - Subject: Restoring a Brownie 2 Crystal Set - Posted on: 05/12/03
Reply to: Robert at robert.elliott5@btinternet.com
Yes hoping to restore this to its original glory. However this Brownie has been somewhat butchered. If you have any of these in your kit box I would really appreciate it if you could get in contact. Crystal arrangement Aerial and earth terminal nuts Headphone connection bolts Loading bridge 5XX Loading coil Tuning Pointer (I do have this but its in poor condition) Tuning Knob Any bits welcome.... thanks RobAd No.: 268 - Subject: employment - Posted on: 05/12/03
Reply to: shailendra yadav at job_skyadav@yahoo.com
tere are some problem.Ad No.: 265 - Subject: AVO Valve Characteristic Meter - Posted on: 05/11/03
Reply to: Mike Novak at miken@avmag.com
I am looking for an AVO VCM163 Valve Characterisiic Meter to purchase. I may settle for the MKIV. Any offers.Ad No.: 264 - Subject: SONY TR-716B/Y - Posted on: 05/11/03
Reply to: Ivan at ivek@post.hinet.hr
Need complete dial cord for SONY TR-716B/Y. Many thanksAd No.: 263 - Subject: Brenell tape recorders - Posted on: 05/11/03
Reply to: Barry M Jones at bjrustic@aol.com
Wanted: SOUND MASTER DIY tape recorder, Brenell 3-Star, Mk.5 (gold-deck), ST200 or 400, Mk.7S - not necessarily in that order! - in good working order, and brochures etc., to assist in researching a new book on Brenell. Many thanks. Barry M JonesAd No.: 260 - Subject: National HRO Receivers/spares WANTED - Posted on: 05/11/03
Reply to: S. A. WRIGHT at sidsengines65@ntlworld.com
Wanted to complete several projects--- NATIONAL HRO RECEIVERS WORKING OR NOT (pref not) IN ANY CONDITION, COMPLETE or INCOMPLETE OR ANY SPARES IN PARTICULAR NEED UX PORCELAIN BASES AS USED IN THESE RECEIVERS, ALSO SPEAKERS AND POWER UNITS IN ANY CONDITION. Thanks SID (G4LBY)Ad No.: 259 - Subject: radios - Posted on: 05/11/03
Reply to: francesco ginepra italia at francesco.ginepra@libero.itradios
Wanted Sonorette,KB BM20/T,Burndept Ethophone V small set,Vortex mod3,Marconiphone RB7, small horn speakers, collapsible loop antenna,Crystal sets, Gecophone crystal n2,four DER valves only for display use and other vintage radios for restore. Thank you at good friends collector that have reply but sorry,offers from Mr Simon-Radioze are not welcome. Regards FrancescoAd No.: 257 - Subject: R1155 - Posted on: 05/10/03
Reply to: Denis Speirs at DYJ154@AOL.COM
Wanted for R1155F ex MOD receiver large (outer) slow motion bakelite tuning knob thanks Denis Speirs ArbroathAd No.: 256 - Subject: cgi-bin - Posted on: 05/09/03
Reply to: Gyan at gyan_dhu2003@hotmail.com
NAAd No.: 255 - Subject: McMichael 367 battery Portable. - Posted on: 05/08/03
Reply to: Dennis Harfield at Hartrains@aol.com
Has anyone a Service Sheet or circuit diagram for this 1936 suitcase portable. I also need a battery cover for this model which presumably carries the logo. Many many thanks. E mail or phone 01297 23357.Ad No.: 254 - Subject: Tannoy Lancaster cabinet(s) empty - Posted on: 05/08/03
Reply to: Joe at joe.power@ntlworld.com
I am looking for a single (but would consider a pair) empty Lancaster cabinet to go with the one I already have. I will consider any condition whether empty or with drivers.Ad No.: 253 - Subject: Back for Bush DAC90A - Posted on: 05/08/03
Reply to: John Wild at m0jvw@hotmail.com
Does anyone have a back cover for a DAC90A ? no problem if burnt around top right where dropper is, many thanks. E-mail m0jvw@hotmail.com.Ad No.: 252 - Subject: Ferranti transformers - Posted on: 05/07/03
Reply to: mark allison at jmallis@blueyonder.co.uk
Has anyone got any Ferranti interstage transformers surplus to reqirements?. Physical condition not important so long as the windings are intact.Ad No.: 251 - Subject: Help Me - Posted on: 05/07/03
Reply to: Anthony Roberts at tizzicle@talk21.com
I have been given a Ekco U357(i think) Radio it has all wavelengths M, L, VHF it is red in colour with a white/cream edge which surrounds the dials and speaker. Anyone who can help me with finding out what year it was manufactured and its current value. It still works as i have been using it.(Good sound)Ad No.: 246 - Subject: Dynatron radiograms - Posted on: 05/05/03
Reply to: Richard at rjh2036@yahoo.co.uk
I am looking for valve Dynatron radiograms (pre 1960's) to add to my collection. Please e-mail rjh2036@yahoo.co.ukAd No.: 245 - Subject: pilot blue peter radio (circa 1945-50) - Posted on: 05/03/03
Reply to: noel mc cafferty at noeloncurleyhill@hotmail.com
I want a restored Pilot Blue Peter radio (circa 1945-50) with fm fitted. Must be in good condition and working orderAd No.: 243 - Subject: Grudig 4085. - Posted on: 05/02/03
Reply to: Dennis harfield at Hartrains@aol.com
I wish to acquire a circuit disgrsm snd alignment details for this model. Can anyone help? E mail or phone 01297 23357. Many thanks. Dennis.Ad No.: 239 - Subject: Taylor 45A valve tester circuit - Posted on: 05/01/03
Reply to: mark allison at jmallis@blueyonder.co.uk
Am in need of a circuit for a Taylor 45A valve tester. Failing that, information on the values of componants located on the paxolin tag strip would be much appreciated. thanks MarkAd No.: 237 - Subject: Restoration - Posted on: 04/30/03
Reply to: John Wilson at Johnwilson@freezone.co.uk
Wanted. Restoration of the basic tenets and usages of the English language and grammar, demonstrably lacking in many of the entries on this site. Whatever happened to education in this country? If you cannot spell or punctuate, why not learn, before inflicting ignorance on the rest of us?Ad No.: 236 - Subject: items needed - Posted on: 04/30/03
Reply to: jonathan dollimore at jd17@york.ac.uk
wanted: back for Murphy SAD 94L and user's handbook (or xerox!) for Gecophone GC 3235 (1931). Also one or more of the white knobs used on 1940s RAP sets.Ad No.: 234 - Subject: help ferranti transformers - Posted on: 04/30/03
Reply to: rusty at rusty13522@yahoo.com
please help i am trying find data on old ferranti transformers i have they have square metal nameplates and are black krinkel finish each trans former has 2 numbers for example I-1 AND ALSO HAS THE NUMBER 4613 thanks rustyAd No.: 229 - Subject: Restoring Bakerlite - Posted on: 04/28/03
Reply to: Darrell Bent at darrell.bent@defence.gov.au
I looking to restore an old bakerlite radio to near its former glory, and wish to find the best method of cleaning or restoring the bakerlite finish. Any tips?Ad No.: 228 - Subject: Valve amps from Linear - Posted on: 04/27/03
Reply to: Karl Johnson at blackcountrybred@hotmail.com
any working old amps from Linear like L45A, Conchord, Diatronic etc.Ad No.: 227 - Subject: Any old equipment from Grampian - Posted on: 04/27/03
Reply to: Karl Johnson at blackcountrybred@hotmail.com
any working old mics, amps, reverb etc from Grampian.Ad No.: 226 - Subject: Old mics ie Reslo, Grampian, EAP etc - Posted on: 04/27/03
Reply to: Karl Johnson at blackcountrybred@hotmail.com
any working old mics, especially ribbon mics from Reslo, Grampian, Grundig, Simon Cadenza, EAP, EMI etc. Also dynamic mics.Ad No.: 211 - Subject: Vintage in-car radio sought - Posted on: 04/27/03
Reply to: William van Zwanenberg at willvz@blueyonder.co.uk
I am seeking a working example of an incar radio for a series IV Sunbeam Alpine car. I am seeking any of the following radios plus their console and speakers in good working order. I am willing to pay over the odds for the right radio: RADIOMOBILE 500T SOU 4 600T SOU 4 620T SOU 4 60T SOU 5 970 SOU 5 980 SOU 5 ------------------- PYE TCR 2000 ALP P2000T/M2738 Installation kit - 089166 ----------------------------- EKCO CR915 RF CR917 RF CR921/M2851 CR922/M2851 Aerial - CA224/1Ad No.: 209 - Subject: HRO Ceramic valve holders. - Posted on: 04/26/03
Reply to: S. A. Wright at sidsengines65@ntlworld.com
Wanted urgently to complete a project UX6 & Ux7 ceramic valve bases. The type used in HRO receivers, also scrap HRO receivers or parts for restoration project spares, no matter how incomplete.Ad No.: 207 - Subject: REL Precedent fm tuner - Posted on: 04/26/03
Reply to: GENELEE at GENELEE@HOTMAIL.COM
i want a mint rel prececdent tuner .contact meAd No.: 206 - Subject: G2DAF receiver - Posted on: 04/25/03
Reply to: Ed Dinning at eddinning@boltblue.com
I am looking for a G2DAF advanced amateur bands receiver to restore, condition immaterial, part built unit or case and parts OK, also looking for G2DAF linear amp to complete a display with his SSB transmiitter. Ed Dinning 01207 270122 eddinning@boltblue.comAd No.: 205 - Subject: Clock for Timespot radio - Posted on: 04/25/03
Reply to: Ed Dinning at eddinning@boltblue.com
Has anyone a clock unit (condition not important) for a Goblin "Timespot" radio. Ed Dinning 01207 270122 eddinning@boltblue.comAd No.: 204 - Subject: Wntd VT-4-C Valves - Posted on: 04/25/03
Reply to: Ben at G4BXD@qsl.net
would like to obtain two VT-4-C triodes if anyone can help ?Ad No.: 202 - Subject: Heathkit RA-1 receiver - Posted on: 04/25/03
Reply to: John Button at jbutton@g8jmb.fsnet.co.uk
Can anyone help? Circuit, alignment details or manual for Heathkit RA-1 amateur bands receiver needed for repair.Ad No.: 199 - Subject: Gararrd 301 and rc 981 with custom cabin - Posted on: 04/23/03
Reply to: jason Klotz at jakeklotz@earthlink.net
Looking for ifo, and some price estinmation on a Payer and Wangeman mohogay/cherry ply, with fold up panel on the top housing a Garrard 301 and rc 981 turntables, original tube amp included as well as a seeming retrofit brocinermark 30c (tube)signal receiver/transmitter and a you never would have guessed it: a craftsman(tube)tuner amp. all built in. I am looking for any info. as to the dates of these items in manufacture, rough prices on some market, and any line of continuity as to the original makeup of the piece. ThanksAd No.: 198 - Subject: Black metal octal valves type 6J7, 6SQ7, - Posted on: 04/22/03
Reply to: S. A. WRIGHT at sidsengines65@ntlworld.com
Wanted for on-going restoration job, 6 x 6J7 valves, also 2 x 6v6 and 2 x 6sq7 (or any oddments) These are all the black metal octal type and must of course be in working order. Also need 10 grid cans which clip on the top of the 6J7 type valves. Details of price etc please. Thanks SID G4LBY.Ad No.: 197 - Subject: Dansette Dorchester trim - Posted on: 04/22/03
Reply to: john kelly at john@mkelly60.freeserve.co.uk
I am looking for some trim for a dansette dorchester. It runs across the top of the set underneath the handle. Can anybody help?Ad No.: 195 - Subject: Shure M75 ED type 2 stylus - Posted on: 04/21/03
Reply to: Dan Butterfill at dan.butterfill@virgin.net
Young daughter trashed the needle. Does anyone have for sale or can tell me where I can get a replacement stylus? ED type 2.Ad No.: 193 - Subject: Pye "Black Box" repairs? - Posted on: 04/20/03
Reply to: Tom Jones at tom.jones@ossian.biz
Can anyone help me find a repairer for a Pye "Black Box" record player -- c. 1955? Ideally in the London area. Thanks in advance TomAd No.: 190 - Subject: Philips A609 valves & Philips Speaker - Posted on: 04/18/03
Reply to: Justin COOPER at jcoop@lm.net.au
Am looking for some A609 valves, used ok. Am also looking for a metal grille to suit Philips sevenette radio speaker, or complete speaker.Ad No.: 189 - Subject: WANTED RCA AR88 PARTS - Posted on: 04/18/03
Reply to: Justin COOPER at jcoop@lm.net.au
I am trying to get a S meter with RCA logo to suit AR88. also loking for a replacement dial for the centre as mine is too faded to read. a new RCA badge or the complete panel upon which it sits would also be appreciated.Ad No.: 188 - Subject: yahoo forum for vintage transistor radio - Posted on: 04/17/03
Reply to: rob at rob
http://groups.yahoo.com/group/transistorradio_uk/Ad No.: 185 - Subject: Wanted old mics Reslo, Grampian etc - Posted on: 04/16/03
Reply to: Karl Johnson at blackcountrybred@hotmail.com
Any good condition old mic like Reslo, Grampian, Lustraphone, EAP, GEC, Simon Cadenza, STC, etcAd No.: 184 - Subject: Barclay AM Table top valve radio - Posted on: 04/15/03
Reply to: Ian Reeve at ian@ianreeve.fsnet.co.uk
I am looking for any info, preferably a circuit diagram for this Yugoslavian valve radio made for the UK market. I guess it is of late 50's vintage and uses ECH81 & EL84 valves with a EZ80 rectifier. No model No is quoted although the following is written on a label inside the case Nikola Tesla Beograd R2 250 03Ad No.: 183 - Subject: gecophone 2501 0r 2500 - Posted on: 04/15/03
Reply to: frank goddard at tge@beeb.net
Would appreciate top photograph or copy of advertisement displaying gecophone 2501 or 2500. Appx 1924. Need to identify missing hardware . Many thanks. FrankAd No.: 182 - Subject: Codar Multiband 6 - Posted on: 04/15/03
Reply to: George at watsonz97@hotmail.com
Does anyone have any info or circuits about this set?Ad No.: 181 - Subject: Ferranti tombstone. - Posted on: 04/14/03
Reply to: Dennis Harfield at Hartrains@aol.com
I am looking for a back and speaker grill for this model. Would purchase a non working model for spares or restoration.Ad No.: 179 - Subject: wanted valve tester - Posted on: 04/14/03
Reply to: p rothwell at peter@rothwel.fsnet.co.uk
wanted valve tester please email or tel 01202 695350 if you can help peter m0bkzAd No.: 178 - Subject: Wayne Kerr B521 Component Bridge - Posted on: 04/14/03
Reply to: Paul at paul_earland@postmaster.co.uk
I am looking for the Operating Instructions and the Circuit for the Wayne Kerr B521 Component Bridge. Wayne Kerr will copy me the manual for £75!!!!. Thanks. PaulAd No.: 177 - Subject: Vintage Wireless Books - Posted on: 04/13/03
Reply to: P.Goulding at paul38g@ntlworld.com
Still looking for old and interesting books/mags/data for wireless and valves from the 20's-50's period.Especially constructional books/articals,and early valve data manuals.Thanks for looking Regards PaulAd No.: 176 - Subject: Lenco L85 Schematic - Posted on: 04/13/03
Reply to: Wendell Monnink at wendell@magicmail.co.za
Can anybody help with a schematic for a Lenco L85 turntableAd No.: 175 - Subject: H.R.O. Receiver/s wanted - any condition - Posted on: 04/13/03
Reply to: S. A. WRIGHT at sidsengines65@ntlworld.com
HRO receiver/s wanted by active collector, need spares for several projects, so any type, any condition considered, also speakers and power units In fact anything to do with HRO receivers of interest Thanks SID (G4LBY)Ad No.: 173 - Subject: wanted - Posted on: 04/13/03
Reply to: Francesco Ginepra at francesco.ginepra@libero.it
vintege radios years 1920 and accessories,horn speakers,headphones Gecophone and Marconiphone, Sonora/Sonorette/excellenc,fada 845,Dahlberg/Pillow speaker,Antonini Dottorini,De Forest and similar sets. Thank you.Ad No.: 164 - Subject: Knob for G.E.C. BRT.400E - Posted on: 04/10/03
Reply to: Paul at paul_earland@postmaster.co.uk
Looking for a small knob (ssb control) for a G.E.C. BRT.400E Thanks. PaulAd No.: 160 - Subject: A.P.4 MkV Spy-Tranceiver Schematic need - Posted on: 04/05/03
Reply to: John Syros at johnsyros@hotmail.com
I have recently aqcuired an A.P.4, MkV, British Spy-Tranceiver. I need its Operator's and technical Manuals and/or Schematics. Any info will be muh appreciated. johnsyros@hotmail.comAd No.: 159 - Subject: A.P.4 MkV Spy-Tranceiver Schematic need - Posted on: 04/05/03
Reply to: John Syros at johnsyros@hotmail.com
I have recently aqcuired an A.P.4, MkV, British Spy-Tranceiver. I need its Operator's and technical Manuals and/or Schematics. Any info will be muh appreciated. johnsyros@hotmail.comAd No.: 158 - Subject: A.P.4 MkV Spy-Tranceiver Schematic need - Posted on: 04/05/03
Reply to: John Syros at johnsyros@hotmail.com
I have recently aqcuired an A.P.4, MkV, British Spy-Tranceiver. I need its Operator's and technical Manuals and/or Schematics. Any info will be muh appreciated. johnsyros@hotmail.comAd No.: 157 - Subject: MILITARY RECEIVER R1475 (R88) WANTED - Posted on: 04/05/03
Reply to: STEVE at SMINKYPINKY@SUPANET.COM
Receiver R1475 & PSU 360 wanted. Must have it's external casing and be in good unmodded condition. Please get in touch if you have one to dispose of. ThxAd No.: 156 - Subject: Whereabouts of Arthur Maultsaid - Posted on: 04/05/03
Reply to: Steven Whiting at steven.whiting@ntlworld.com
Can anyone help me trace this old boy? He was living in Belfast and sold his collection on here last May. I've been in regular contact with him but my emails have gone unanswered since last Christmas. I'm also unable to contact him on his landline but his number may have changed as he was in the process of moving house. Any help will be appreciated.Ad No.: 153 - Subject: Good Radios and Advertising - Posted on: 04/03/03
Reply to: Kneale at bowkermetcalf@hotmail.com
Are there only dealers out there? I am a serious private collector. Most adverts in the For Sale section seem to be consumate professionals. I am willing to pay very good but not silly money for anything unusual. Anyone got any old radio neons stashed? They may cause me to pay silly money! Thanks.Ad No.: 152 - Subject: Bush AC91 radio spare parts - Posted on: 04/03/03
Reply to: Mike Horne at mike@jhorne62.freeserve.co.uk
I am after spare parts for my BUSH AC91 valve radios. A replacement dial glass A replacement loudspeaker & o/p transformer (similar to that of original BUSH DAC90). Can anyone help, please ?Ad No.: 151 - Subject: Non-working Antique Radios - Posted on: 04/02/03
Reply to: Coleen Baker at cbaker@wagnermurray.com
I am in need of 12 - 15 non-working antique radios to be mounted on a wall for a themed lounge.Ad No.: 149 - Subject: WANTED Spares for Roberts Radios - Posted on: 04/01/03
Reply to: Robert at robertsr700@eudoramail.com
UK collector wants to buy knobs, tuning scales, aerials, pushbuttons, trim, scrap chassis, etc. for any of the following Roberts Radios:-
R600, R606, R606MB, R700, R707, R505, R404, R303, RIC1, RIC2, RT22, RFM3, Rambler, R23, R24, R25.
Many thanks.Ad No.: 145 - Subject: wanted - Posted on: 03/30/03
Reply to: Francesco Ginepra at francesco.ginepra@libero.it
Wanted Sobell(Sobellette) model439, Premier Midget, KB BM 20/T, Marconi T15DA and similar in original conditions also not working but complete, Thank youAd No.: 142 - Subject: Weller TCP1 - Posted on: 03/29/03
Reply to: Kevin Beecham at k.c.beecham@btinternet.com
I am trying to get my hands on a replacement TCP1 heater element. does anyone have one for sale or know of a retail source? many thanksAd No.: 141 - Subject: Mc MICHAEL RADIO MH 11036 - Posted on: 03/29/03
Reply to: RAY WILLIS at ray willis @eckoad65.free-online.co.uk
WANTED INFOMATION TO RESTORE THIS RADIO WHICH IS MARKED THE SCREENED CIMIC THREE,will pay for any photocopying and postage or whatever,i am sure one of you will know,many thanks.Ad No.: 140 - Subject: Seeburg Jukebox.Serial No.1537708. - Posted on: 03/28/03
Reply to: Chris at zackie@ntlworld.com
Desparately seeking someone in the U.K. doing jukebox repairs. Preferably as close to the Nottingham area as possible. Apologies for encroaching on your site, but I really am desparate. Many thanks.Ad No.: 134 - Subject: Wanted Marconi 296 - Posted on: 03/27/03
Reply to: Brian at bwpallister@yahoo.co.uk
I am looking for a good restorable case for a Marconi 296 will take a complete set, not fussed about the PX4, got one.Ad No.: 133 - Subject: WANTED: RCA VICTOR 45 EY2 IDLER WHEEL - Posted on: 03/27/03
Reply to: Steve at soneill4135@rogers.com
In Toronto, Canada: Need what my technician calls a "heart-shaped idler" to restore my RCA Victor 45rpm ey2 phonograph. Can anyone tell me where I can get one either through a collector in my area or on the internet? Thanks SteveAd No.: 132 - Subject: AWA transistor radio wanted - Posted on: 03/25/03
Reply to: Luke at ocknroll@freeuk.com
Seeking AWA Radiola 6 and AWA radiola 8 transistor radio.Made around 1961.Ad No.: 130 - Subject: Drake MS-4 Speaker - Posted on: 03/25/03
Reply to: Paul at paul_earland@postmaster.co.uk
Wanted in nice condition Drake MS-4 Speaker. Thanks. PaulAd No.: 129 - Subject: Wanted - Racal HF receiver - Posted on: 03/24/03
Reply to: Richard at richard.reich@saatt.co.uk
I am interested in a Racal receiver - any model, working or not. Also other Racal items would be of interest. Thank you. Call: 01252 795234Ad No.: 126 - Subject: Work At Home!!!!!!!!!!!!!!!!!!!! - Posted on: 03/23/03
Reply to: iaitcepi at shriyananp@yahoo.com
Do you hate spam? Wondering how on earth people are finding your email address when you KNOW you didn't subscribe to their "mailing lists"? Get Email Scrambler and STOP spammers from harvesting your email address INSTANTLY!Ad No.: 124 - Subject: LOTS OF SPAM>>>> - Posted on: 03/20/03
Reply to: Radio Collector at fra2003@yahoo.com
Dear Webmaster, It would appear that your sales forum is being used for spam and advertising rather than radio sales.Ad No.: 122 - Subject: Income Opportunity - Posted on: 03/20/03
Reply to: IAITCEPI at nepal_1100@rediffmail.com
Need a web design but have no idea where to begin? Sick of paying high prices for over-used templates? Get a TWO pack website template kit that will give you over a DOZEN of the most professional designs, ALL ready to go! Get it now! http://www.myaffiliateprogram.com/u/pr/e.asp?e=12&id=7236Ad No.: 119 - Subject: Pamphonic 1001 / Pye PF91 - Posted on: 03/20/03
Reply to: Richard at rjh2036@yahoo.co.uk
I am looking for a single Pamphonic 1001 or Pye PF91 amplifier. Any help would be grately appreciated. Please e-mail: rjh2036@yahoo.co.ukAd No.: 116 - Subject: McMICHEAL DIMIC THREE - Posted on: 03/18/03
Reply to: ROY at BODGE@INTECPC.CO.UK
HAS ANYONE ANY INFO OR CIRCUIT DIAGRAM FOR A McMICHEAL DIMIC SCREENED THREE ?Ad No.: 115 - Subject: Ivelek crystal radio wanted - Posted on: 03/17/03
Reply to: steve bills at sbillsy@aol.com
Desparately looking to buy an 'Ivelek' crystal radio. They had a bakerlite case(usually cream coloured) and were produced in the 60s.Good price willingly paid for a good example.Ad No.: 113 - Subject: A41 RADIO - Posted on: 03/17/03
Reply to: jeff Elson at jeffrey.elson@ntlworld.com
I am looking for an antenna, headset/handset carrying harness (backpack)for the A41 radio used in the British Army of the 1970's.Ad No.: 112 - Subject: Info on Blaupunkt Arkansas 57 - Posted on: 03/17/03
Reply to: alludep at alludep@prodigy.net
Can anyone tell me about this cabinet radio I've inherited? Was made in Germany...I know that but how old is it? Is it valuable? Thanks.Ad No.: 111 - Subject: Avo Meter - Posted on: 03/16/03
Reply to: Frank Mooney at frank.mooney@ntlworld.com
As a `newby` to radio, I`ve managed to get an AVO multi-meter,and I`d like to learn how to use it. Although there's a plate on the back,with some tips, there`s some rubbed off. Would anyone out there have an instruction manual I could buy, or tell me where I could get one.Frank.Ad No.: 108 - Subject: WANTED - Posted on: 03/15/03
Reply to: Graham Sutton at rolls@lineone.net
Wanted any short wave radio equipment manufactured by the Codar Radio Company of Sussex, made in the mid 60's. Mini Clipper CR66 CR70A Q Multiplier PR30 Preselector, circuit diagrams etc. These were sold as kits for the amateur constuctor. Please Email rolls@lineone.net with details.Ad No.: 107 - Subject: Looking for Lotus & early Pye sets - Posted on: 03/15/03
Reply to: mark allison at jmallis@blueyonder.co.uk
Looking for Lotus and early Pye sets & ephemera. markAd No.: 100 - Subject: Earn Money By Typing Ads - Posted on: 03/14/03
Reply to: IAITCEPI at nepal_81@rediffmail.com
Sick of losing affiliate sales because SOMEONE went directly to the website instead of following your links? Affiliate Mask will ensure they CAN'T do that! Quick & Easy software program solves your problem.Ad No.: 99 - Subject: START EARNING TODAY! - Posted on: 03/14/03
Reply to: Humble at speaktohumble@yahoo.com
Earn $10 just for signing up FREE! Get others to subscribe... FREE and you'll earn US$0.40 per member that you sponsor (1st level). You'll also earn US$0.20 per member sponsored by the one you sponsor (2nd level).visit in: http://66.227.26.62/mr4/index.htmlAd No.: 98 - Subject: START EARNING TODAY! - Posted on: 03/14/03
Reply to: anish at anishcl2000@yahoo.com
Earn $10 just for signing up FREE! Get others to subscribe... FREE and you'll earn US$0.40 per member that you sponsor (1st level). You'll also earn US$0.20 per member sponsored by the one you sponsor (2nd level). visit in: http://www.resource-a-day.net/member/index.cgi?vk_vkAd No.: 94 - Subject: EBONITE WANTED - Posted on: 03/12/03
Reply to: John Chapman at John@G4FIT.com
Ebonite sheet, especially 3/8" and 1/2" thick - anyone have any spare?Ad No.: 91 - Subject: John Logie Baird Televisor - Posted on: 03/11/03
Reply to: colin mackenzie at baird @hificorner.co.uk
Wanted Baird Televisor, original neon or original advertising or instruction book for sameAd No.: 88 - Subject: Record Player - Posted on: 03/10/03
Reply to: Steven Casson at bushdac90@q-serve.com
Wanted-Dansette Record Player in good working order and reasonably priced for playing old 45s and Lps.Ad No.: 85 - Subject: Cameraphone Crystal Set. - Posted on: 03/08/03
Reply to: Dennis Harfield at Hartrains@aol.com
Can you help? I have recently acquied a crystal set which in appearance looks like an enlarged Brownie camera without the camera parts. Embossed in the lid is the word Cameraphone,it has provision for two plug in coils, two phone outlets and A & E terminals. The detector is of the permanent or semi permanent type. To me it appears to be Circa 1925 . Has anyone seen this type or have any factual info on this model . Thanks Dennis.Ad No.: 82 - Subject: MARCONI OR HMV TRANSISTOR RADIOS WANTED - Posted on: 03/07/03
Reply to: flemmingra2@yahoo.com at flemmingra2@yahoo.com
MARCONI OR HMV TRANSISTOR RADIOS WANTED
UK collector will pay cash for the above, please email with model number and photo if poss.
Can collect or pay postage.
flemmingra2@yahoo.com
ThankyouAd No.: 81 - Subject: Quad 303. - Posted on: 03/07/03
Reply to: David Pritchard at david-pritchard@qmcr.fsnet.co.uk
I would like to buy any faulty Quad 303 which requires repair.Ad No.: 78 - Subject: Technical help with Quad 303 power amp - Posted on: 03/05/03
Reply to: David at starr42@totalise.co.uk
Long shot I know cos this isn't a technical site, (I can't find one)but is there anyone out there who can help with a problem I have with my 303. On switch-on there is a very loud thump, so bad it seems the KEF speaker cones are trying to leave their frames. Voltages seem to be ok ie 67 & 33.5. and the output & smoothing caps seem to be ok charging and discharging when tested with an Avo model 8. I'm tearing my hair out. Can anyone help or point me in the right direction before I go baldy! (Once on the system works wonderfully) Thanks in anticipation DavidAd No.: 77 - Subject: SME Tonearm - Posted on: 03/04/03
Reply to: Wally Morgan at wdm@sofa.u-net .com
Has anyone got an SME tonearm 3009 or 3012 that I can purchaseAd No.: 76 - Subject: PANTRONICS HF-COM DX10-D - Posted on: 03/04/03
Reply to: ian parkinson (G3YRQ) at ian.parkinson@ntlworld.com
any info on what appears to be a AM & ssb tx, and receiver, XTAL contolled 10 channels. Unit has no mic i/p socket but a 16 pin conector at rear, probably a plug in unit for a main box.? Anyone know the Marconi appolo rx, any ex marine radio ops have their college notes on this rx especially the frequency counter?Ad No.: 74 - Subject: eddystone s750 - Posted on: 03/02/03
Reply to: Tony Hall at tony122@ntlworld.com
wanted, "finger plate" for an eddystone model s750 or information as to where i can get one made. Good price paid for a first class example. please e-mail "tony122@ntlworld.com"Ad No.: 72 - Subject: Philips 470A radio cabinet - Posted on: 03/02/03
Reply to: Mike Horne at mike@jhorne62.freeserve.co.uk
Does anyone have a cabinet for the Philips 470A valve radio (1938), in good condition ?. The present one has a small piece of bakelite missing towards the rear of the set, around the l.h fixing bracket. Can anyone help, please ?Ad No.: 70 - Subject: Bogen heads for Brenell tape recorder - Posted on: 03/01/03
Reply to: Barry M Jones at BJRUSTIC@aol.com
I am after a BOGEN 1/2 track Record head and more urgently a BOGEN 1/4 track Playback head for a Brenell STB-1. Must be in good working order. These have the triangular base plate with three adjuster screw holes. Many Thanks, Barry M JonesAd No.: 69 - Subject: WANTED Ormond variable capacitor knobs - Posted on: 02/28/03
Reply to: Simon Busbridge at s.c.busbridge@bton.ac.uk
Ormond concentric spindle variable capacitor knobs for Ormond capacitors the type with the friction slow motion mechanism on the rear for TRF projects. Thanks SimonAd No.: 68 - Subject: WANTED Weymouth TRF Coils - Posted on: 02/28/03
Reply to: Simon Busbridge at s.c.busbridge@bton.ac.uk
I'm looking for a pair of CT2W2 Weymouth TRF coils, one HF and one reaction, for a TRF project. Any help greatly appreciated. SimonAd No.: 67 - Subject: a new stylus for Dansette - Posted on: 02/28/03
Reply to: cguirron at cguirron@dundee.biblio.net.co.uk
Wanted :new stylus for Dansette...addresses in Scotland where they may be purchased. Also wanted:sixties style jukebox, for 45s willing to pay good price ,must be good condition.Ad No.: 57 - Subject: Audiomaster speakers - Posted on: 02/25/03
Reply to: GRAHAM at gbell@forth.co.uk
I'm looking for any info on Audiomaster MLS1 loudspeakersAd No.: 56 - Subject: PYE PF8 - Posted on: 02/24/03
Reply to: Lisa Williamson at lisaci5@bushinternet.com
Still deperately searching for 1 0r 2 PYE PF8's. Will pay good price, any info would be very much appreciated Thanks,Lisa xAd No.: 53 - Subject: Stella ST105U Radio - Posted on: 02/22/03
Reply to: Maurice Woodhead at mauricewoodhead@aol.com
Looking for a case for the above Radio.
The back is perfect but the front is wrecked (control/dial etc ok). If anyone has a scrap set that I can use to restore this one please get in touch. Or I am willing to part with my set if someone is trying to restore one.
Many Thanks
mauriceAd No.: 47 - Subject: Tone arm & headshell wanted - Lenco L75 - Posted on: 02/20/03
Reply to: Leendert at mwldek@mweb.co.za
I want to replace the tone arm on my Lenco L75. If you have an old Lenco turntable and the tone arm is still good please contact me.Ad No.: 46 - Subject: philips 634a - Posted on: 02/20/03
Reply to: Giovanni d'Amore at namgio@yahoo.com
I'm looking for a Philips radio model 634a, in fairy good conditions and complete. Please let me have your offer and possibly a photo. namgio@yahoo.comAd No.: 40 - Subject: Monarch Three Speed Record Changer 1953? - Posted on: 02/19/03
Reply to: klaus at klaus1149@hotmail.com
Suche Handbuch für Plattenspieler Monarch Three Speed Record Changer 1953? geschenk von meinem Opa möchte ihm wieder neues Leben einflössen,läuft soweit aber transportiert den Tonarm nicht wer kann helfen???vielen Dank im vorausAd No.: 39 - Subject: Phillips 727A. ( Mullard MAS6 ) - Posted on: 02/18/03
Reply to: Dennis Harfield at Hartrains@aol.com
Can you help? I am having extreme difficulty in reassembling the cord dial drives on this model.I have checked the BVWS CDs which are usually very helpful but in this instance it gives no assembly instructions. Has anyone out there got any ideas as the set works very well. Many thanks. Dennis.Ad No.: 35 - Subject: HF Receiver Wanted - Racal - WJ - Posted on: 02/17/03
Reply to: Richard at richard.reich@saatt.co.uk
Racal HF receiver wanted. Also Watkins and Johnson HF receiver model WJ8888 otherwise known as the quad-8. Does anyone know where I might get one of these? Any other model W&J also of interest. Cash waiting. Contact email as above, or telephone: 01252 795234. Thank you.Ad No.: 33 - Subject: akai digital amplifier model No AM-M800 - Posted on: 02/17/03
Reply to: Roy at rmdl22770@blueyonder.co.uk
Im looking this amplifier as its part of a stack sytem. Working or Faulty.Ad No.: 31 - Subject: Signal Radio Corp - Posted on: 02/17/03
Reply to: Tseug at tseug@btinternet.com
Interested in any information about Signal Radio Corp (makers of R535 etc). Also interested in buying Signal radios for private collection. Thanks for readingAd No.: 29 - Subject: wiring diagram wanted - Posted on: 02/16/03
Reply to: mike byrne at mikebyrne@jentune611.freeserve.co.uk
i require a wiring drawing for a beam echo amplifier type DL7.35 .I also need a handbook for a kolectric coil winder circa 1960. am also looking for a quad valve amplifier type 11 to match my existing one. Finally i also need a garard type 301 turntable and also a sme arm. would also be interested in 57 electrostatics.Thankyou mike byrne.Ad No.: 26 - Subject: service data - Posted on: 02/16/03
Reply to: Mike Horne at mike@jhorne62.freeserve.co.uk
Does anyone have company service manuals on the following valve radios ?(not NEWNES book circuit copies PAM TR26 PILOT BS648. Thanks MikeAd No.: 25 - Subject: Crystal Wavemeters - Posted on: 02/16/03
Reply to: Ian Sanders at ilsande@attglobal.net
Early (1920s) crystal wavemeters wanted. Top prices paid.Ad No.: 23 - Subject: any information about bush ebs 23 - Posted on: 02/14/03
Reply to: Maarten at tboy@mmrmedia.xs4all.nl
any information is welcome thanks see http://www.xs4all.nl/~mmrmedia/bushradio/Ad No.: 22 - Subject: Case for AR88 - Posted on: 02/14/03
Reply to: John Simons at sam@baldeagle.worldonline.co.uk
Yes! Its me again! Still looking for a case for an AR88. Anyone? TIA John SimonsAd No.: 20 - Subject: OLD RECORD PLAYERS WANTED - Posted on: 02/11/03
Reply to: Gary Hedley at GARYHEDLEYNO1@AOL.COM
I am looking for a box stle record player, (possibly early 70's), must be in good working order and condition, I am based in Newcastle upon Tyne (uk) but can travel to collect. of if you know anywhere i can get one then please let me know. Thank you very much xAd No.: 19 - Subject: Old box record players wanted - Posted on: 02/11/03
Reply to: Gary Hedley at GARYHEDLEY@AOL.COM
I am looking for an old box style record player (approx early 70's) must be in good working order and condition please. I am in Newcastle upon Tyne (uk) but i can travel to collect within reason. thank youAd No.: 17 - Subject: Pye PF8 Pocketphone - Posted on: 02/11/03
Reply to: Ian Page at ianpage@hotmail.com
I know that these are harder to obtain than hens teeth but...... If anyone has any they would like to sell, I will pay good cash. Any condition, any quantity. Also, if anyone has any information on company's that have or get these units occasionally, let me know. Many thanksAd No.: 16 - Subject: Kolster Brands ITT KB model Radiogram - Posted on: 02/10/03
Reply to: Barry Stanley at barry@anitastanley.fsnet.co.uk
Can anybody point me in the right direction, I am trying to find out some information on a Kolster Brands ITT KB model Radiogram that my Grandparents have left us, I'm not sure of the model but the operating instructions quote KG044, KG045, KG046 and is stamped up KBCI9, the turntable is a BSR C109, I would appreciate any help I can get.Ad No.: 10 - Subject: HEADPHONES WANTED - Posted on: 02/09/03
Reply to: JOHN ALLEN at JOHNROYALLEN@HOTMAIL.COM
WANTED, Vintage 2000 ohm or more Headphones suitable for crystal set reception cornwall England.Ad No.: 8 - Subject: ekco ad65 schematic diagram - Posted on: 02/09/03
Reply to: koen lams at koen.lams@pandora
I'm looking for a schematic diagram of the circuit of an EKCO ad65.Ad No.: 7 - Subject: Wanted QUAD 11 - Posted on: 02/09/03
Reply to: Wally at wdm@sofa.u-net.com
I am looking for a pair of Quad amps in any condition or bits for same.Ad No.: 5 - Subject: Please help with mystery KB set. - Posted on: 02/08/03
Reply to: Richard at richandsue@madasafish.com
Can anyone help me with this set?
It a KB FB15T, medium and short wave, 5 valve, 120 + 220V AC/DC.
In the same case as a KB FB10.
Any info please.
Will pay fair price + costs for service data etc.
With thanks
Richard.Ad No.: 4 - Subject: Apologies - Posted on: 02/07/03
Reply to: Webmaster at radio@qsy.to
Sorry but adverts from the end of Dec to the 7th Feb have been lost, pleas repost any entries - Thanks, DavidAd No.: 3143 - Subject: Brenell tape recorders - Posted on: 12/21/02
Reply to: Barry Jones at bjrustic@aol.com
I am researching for a bok on Brenell Engineering and would like to hear from those with sound knowledge of the company, their early days in contract engineering (Soundmaster; telephone answering machines) and of their later years when they became part of Allen+Heath-Brenell. Many thanksAd No.: 3142 - Subject: Seeburg 8 track unit wanted - Posted on: 12/21/02
Reply to: Jim at wait49@aol.com
8 track unit (optional accessory for SEEBURG Home Stereo Consol)wanted. Ideally should be for 50Hz, but I don't know if any were made to U.K. spec. Anything considered. Also catalogues etc relating to Seeburg Home Syereo Consol wanted.Ad No.: 3140 - Subject: Chakophone sets - Posted on: 12/20/02
Reply to: Willem Hackmann at willemhackmann@aol.com
Long established collector of Chakophones will pay best prices for interesting examples of these sets by Eagle Engineering of Warwick. I am particularly looking for the Chakophone crystal set, the No. 2 sloping front and the No. 7 four valves of around 1926. I am also interested in buying or getting information of the Chakophone radiogram with wind-up motor of 1930/1. I also collect early Marconiphones and am still looking for a 'Baby' crystal set and the mahogany coils holder of a No. 31 that fits beneath the mahogany case of this radio. I am restructuring my collection and am disposing of some of my post 1930 Marconiphones. Willem HackmannAd No.: 3137 - Subject: Manual Redifon 551 - Posted on: 12/17/02
Reply to: Jan Rijnders at pa0chs@amsat.org
I have a Redifon 551 made for Poland with a set of incomplete documentation in Polish (which is not my favorite language). If anyone has a complete manual in English for a reasonable price please mail me. Thanks in advance. 73, JanAd No.: 3136 - Subject: LSB-filter 1.4 MHz (Redifon) - Posted on: 12/17/02
Reply to: Jan Rijnders at pa0chs@amsat.org
Wanted for my Redifon 551A receiver: a LSB x-tal filter 1.4 MHz. If anyone has such a filter in his junk-box, please send me a mail. Thanks in advance! JanAd No.: 3133 - Subject: Ferguson 366 radio - Posted on: 12/15/02
Reply to: Bob Stirling at bob@kingussie0.fsnet.co.uk
Table model as seen in Radio Radio fig.547. Any condition but must be complete. Sorry can't collect but will refund carriage costs. tel. Bob on 01540 661 345 or e-mailAd No.: 3132 - Subject: Restored 30's or 40's radio wanted - Posted on: 12/15/02
Reply to: Ken Hatfield at focusing22@yahoo.co.uk
Excellent order table radio wanted, must be all original pref. cathedral type but not essential.Ad No.: 3131 - Subject: Dynatron Nomad - Posted on: 12/14/02
Reply to: Hazeybabes at janedrury@onetel.net.uk
I have a dynatron nomad in need of repair. It dates back to 1960.It was a 21st present for my mum who has now recently retired. We would love to get it restored for her. Is there anyone out there who could restore this much loved radio to its former glory? We live in Lancashire, but to get a professional job done would be prepared to go nationwide. Please contact me as soon as possible if you can help. many thanks hazeybabes IAd No.: 3129 - Subject: Bush DAC 90 Mains Lead - Posted on: 12/13/02
Reply to: Paul Gibson at t@vern.karoo.co.uk
I have a Bush DAC 90 but have no mains lead. Can anyone out there help me? I am located in Hull and will collect or pay postage.Ad No.: 3128 - Subject: wanted gecphone radios - Posted on: 12/13/02
Reply to: peter rothwell at peter@rothwel.fsnet.co.uk
gecophone valve radios wanted also any catologes manuals etc peter tel 01202695350Ad No.: 3127 - Subject: Burndept slow motion tuning knobs - Posted on: 12/12/02
Reply to: Bob Stirling at bob@kingussie0.fsnet.co.uk
I am looking for a pair of Burndept slow motion tuning knobs with or without scales as found on Burndept Screened grid 4 and Universal Screened 5.Ad No.: 3126 - Subject: wanted gecphone radios - Posted on: 12/12/02
Reply to: peter rothwell at peter@rothwel.fsnet.co.uk
wanted 1920 gecophone radio peter 01202695350Ad No.: 3125 - Subject: Info on Ekco TC 162 Television - Posted on: 12/12/02
Reply to: Alan Harradence at ah@george-monoux.ac.uk
Could anyone help me please. I need to know what crt's were used with Ekco TC 162 tv's. Ihave a chassis which i am planning to revive (from the dead !!),and i have'nt got the crt?.Also any other info on this set would be much appreciated. Cheers, Alan.Ad No.: 3121 - Subject: Regentone Handygram Recordplayer - Posted on: 12/11/02
Reply to: Dear at grimalkin@ic24.net
Manufactured around 1954 four speed autochange portable record player with built-in speaker.Ad No.: 3120 - Subject: Test Cards-Mullard Valve Tester - Posted on: 12/11/02
Reply to: Paul Earland at paul_earland@postmaster.co.uk
Wanted Punched Test Cards for Mullard High Speed Valve Tester. PaulAd No.: 3119 - Subject: Need a Marantz 2225 owners manual - Posted on: 12/10/02
Reply to: ron kstrzeski at rotiko2000@webtv.net
Will pay top $$ for a Marantz 2225 owners manual. Ron...Ad No.: 3114 - Subject: radio/record player - Posted on: 12/08/02
Reply to: cindy at deano@ohiohills.com
Need information on a Magnavox Radio/Record Player about 1950's sold by The Mayfair Company of Fort Wayne, Ind. The serial nember is 306274 and the style is C-113-29. Reply to: Cindy at deano@ohiohills.comAd No.: 3108 - Subject: PYE PF8 Transceivers - Posted on: 12/05/02
Reply to: Lisa Williamson at lisaci5@bushinternet.com
I am desperate to gat my hands on one or a pair of PYE PF8 transceivers. Would be grateful if anyone with these items could contact me, also anyone who could tell me where I can search for the above. Thanks, LisaAd No.: 3107 - Subject: Leak TL25 Plus, Leak TL25 plus, Chapman - Posted on: 12/04/02
Reply to: Martin at martingunnarsson5@hotmail
I have a Leak TL/12 Plus power amp, a Leak Tl25 plus power amp, a Leak Point One Plus pre amp and an old Chapman tuner. These items are very tidy but have not been used in numerous years. Could anyone out there tell me what this lot is worth? Much ObligedAd No.: 3102 - Subject: Philips - Posted on: 11/30/02
Reply to: Bernard at bernardf@caramail.com
I'm looking for old Philips (620, 630, 634, 720, 730, 824, 830, 835, 930, 936, 938, 944, 960, 964, 990, 2517, 2531, 2532, 2533, 2553, 2634, 2636, 2007, 2036,...).Ad No.: 3101 - Subject: Kolster Brandes FR 20T - Posted on: 11/30/02
Reply to: Nigel at nigelh@mintek.co.za
Can anyone tell me the year of this radio, and perhaps where I can get a circuit diagram? I've found the FR10, but nothing on the FR 20T. Thanks. NigelAd No.: 3100 - Subject: Manual for Heathkit HW101 - Posted on: 11/29/02
Reply to: A.Higgins at aemarhi@aol.com
Looking for Heathkit manual for transceiver HW101.Please email me directly if you can assist.Many thanks = A.Higgins Gi3YMTAd No.: 3099 - Subject: Wanter Hickok mod # 177 tube tester info - Posted on: 11/28/02
Reply to: Rick at riushr@netscape.net
Has anyone out there figured out how to test a 6AR6/6384 on a Hickok military mod# 177 tester. If so will you share the info with me? Thanks Rick.Ad No.: 3098 - Subject: HELP - Posted on: 11/27/02
Reply to: Ian Keyser at ian@g3roo.fsnet.co.uk
Help on info of a radio I have.... it is in a 'rexine covered box with a rounded lid 14.5 x 12.5 x 9 inches with a domed lid. Under the lid are two bakelite panels, one which covers the three valves and battery box, the other has three knobs and one switch..... two large 'tuning' knobs and a volume (vartiable cap) and a switch marked long ans short. Who was ERP? and any info much appreciated Ian, G3ROOAd No.: 3097 - Subject: Need schematics - Posted on: 11/27/02
Reply to: Tom Himmelsbach at thimmelsbach@cenix.com
Schematic needed to help with restoration. Jaguar AM radio mfg. by World Radio Model #626 S/N R302112. Any help appreciated.Ad No.: 3096 - Subject: KB radios - Posted on: 11/26/02
Reply to: Kneale at bowkermetcalf@hotmail.com
I am on the look out for coloured taosters or BM20's. Anything considered. Especially interested in the "speckle" model. Either swap or folding wad available. Anyone local to East Anglia out there?Ad No.: 3095 - Subject: Garrard 4HF - Posted on: 11/26/02
Reply to: Johann Pummer at jp0906@sms.at
I recently have bought a Garrard 4HF turntable on a flee market. Although the motor is okay the platter does not start turning. Does anybody know what can be wrong with it?Ad No.: 3094 - Subject: Hacker Sovereign (RP18) circuit diagram - Posted on: 11/26/02
Reply to: Mike Izycky at mjizycky@hotmail.com
Seeking circuit diagram for the above set; all costs met.
Thanks in advance,
MikeAd No.: 3092 - Subject: Turntable belt - Posted on: 11/26/02
Reply to: Princessdja at djahrens@hotmail.com
I have a technics turntable SL-BD20D. But it has no belt. Where do I find a belt?Ad No.: 3091 - Subject: Info Wanted - Posted on: 11/25/02
Reply to: Ian at fishcakes@clara.co.uk
Does anyone have Circuit diagrams for following Rireless sets Ekco A110 KB RhapsodyAd No.: 3090 - Subject: Knight Kit KG-620 VTVM Manual - Posted on: 11/25/02
Reply to: D.Polson at dpolson@azonline.com
I'm looking for a copy or original fo the manual for a Knight Kit KG-620 VTVM . Please include large assembly fold out if available and nay troubleshooting guides. Also may need meter movement for it. Thanks, D.PolsonAd No.: 3089 - Subject: Knight Kit KG-620 Manual - Posted on: 11/25/02
Reply to: D.POLSON at dpolson@azonline.com
I'm looking for an original or copy of a manual for Knight Kit KG-620 VTVM. Please include large fold out assembly drawing is available and any troubleshooting guides.Ad No.: 3088 - Subject: Taylor 45B Valvetester - Posted on: 11/24/02
Reply to: Peter Jongbloed at sudarsan@zonnet.nl
Hi, i'm looking for the schematic diagram and ABC switch position table of the 45B valvetesterAd No.: 3087 - Subject: Pye Invicta Portable Radio - Posted on: 11/24/02
Reply to: Graham Fisher at glf@supanet.com
Wanted - Information on a Pye Invicta Portable Radio c.1933. I cannot find any model number. It appears to be a 4 valve TRF in a blue rexine covered cabinet with octagonal speaker grille in polished wood. Any information gratefully received so that I can restore it to working condition.Ad No.: 3086 - Subject: Blaupunkt Rio De Luxe - Posted on: 11/24/02
Reply to: Steven Misetich at misetich@mhonline.com
I am looking for information on a working Blaupunkt Rio De luxe. It is in Great condition with just a few minor scratches on the finish (barely noticable). I don't know the exact year, it looks like the 50's. Wherer can I get more information, and approximate appraisal.Ad No.: 3084 - Subject: Trio 9R-59D .'Missing valve'??. - Posted on: 11/22/02
Reply to: john at j.maycock@ntlworld.com
Can anyone please help.I have a Trio 9r-59d receiver. There appears to be an unused valve holder near to the mains transformer.The schematic I have does not show this.Could it be used in a later version or is it for voltage stabilization ?.Anyone have info as to the type of valve required ??,and does it have any effect by adding this.Ad No.: 3082 - Subject: Mullard DO25 valves. - Posted on: 11/22/02
Reply to: Richard at richandsue@madasafish.com
Hi
I am looking for some DO25 valves for an amp restoration.
Willing to pay a good price.
Please Email me if you can help.
RichardAd No.: 3077 - Subject: Ferguson 384U - Posted on: 11/21/02
Reply to: Mike Horne at mike@jhorne62.freeserve.co.uk
Does anyone have a good spare cabinet for the Ferguson 384U "Finesse" valve radio ?. The one on mine is damagedAd No.: 3076 - Subject: Barclay valve radio - Posted on: 11/21/02
Reply to: Mike Horne at mike@jhorne62.freeserve.co.uk
Does anyone have spares & info for a BARCLAY a.m push-button valve mains radio. It was made in 1964 by E.I, who were based in former Yugoslavia. This model was an export, and was shipped to the U.K. I require the dial glass for the export model (even has Radio Caroline on dial!), as mine has broken in two parts. A photo can be sent to show the basic outline of the set. Thanks. Mike HorneAd No.: 3075 - Subject: Oscilloscope Knobs wanted - Posted on: 11/21/02
Reply to: Paul Bailey at b.t.services@ntlworld.com
Can anybody supply me with either: coarse time-base control knob for Telequipment Serviscope 32A or time-base control knobs for Bradley Electronics 200 oscilloscope.Ad No.: 3071 - Subject: US Army TV-2 A/B/C tube tester - Posted on: 11/19/02
Reply to: Ron Kremer at ronkremer@hetnet.nl
Wanted: One or more round (non pointer) knobs as used on the plate, screen, bias, filament and signal regulator. Also wanted Pin straightener as fitted on most TV-2's (but als to be found on TV-7's etc.) Parts needed to restore my TV-2 A/U to "as new" standards.Ad No.: 3069 - Subject: AVO MK3 / 4 Valve Characteristic Meter - Posted on: 11/19/02
Reply to: Ron Kremer at ronkremer@hetnet.nl
Wanted: absolutely undented valve holder cover as used on the AVO MK3 and MK 4 to restore my MK4 to "as new' standards. Respray job, if necessary, no problemAd No.: 3065 - Subject: schematic wanted - Posted on: 11/18/02
Reply to: Mario Caselli at mceass@comune.siena.it
Hello: I own an RGD 1046 Radiogram but have no schematics to repai it. Can you help me ? I need a RGD 1046 schematic. Thank you. Mario CaselliAd No.: 3064 - Subject: Watkins and Johnson Rx wanted - Posted on: 11/17/02
Reply to: Richard at richard.reich@saatt.co.uk
Watkins and Johnson HF receiver model WJ8888 otherwise known as the quad-8. Does anyone know where I might get one of these? Any other model W&J also of interest. Cash waiting. Contact email as above, or telephone: 01252 795234. Thank you.Ad No.: 3061 - Subject: radiola 18 - Posted on: 11/16/02
Reply to: wiltin walmar at wiltin1@msn.com
need a volume control for a radiola 18. Also need base cover for RCA 100-a speaker.Ad No.: 3059 - Subject: Information needed - Posted on: 11/15/02
Reply to: Pine Pienaar at aps@logica.co.za
I am interested in any articles on the replacement of valves with FETs. I know that Wireless World had such a series, but any relevant info will be highly appreciated.Ad No.: 3054 - Subject: Mid 70's:The bone phone - Posted on: 11/15/02
Reply to: Anthony Richards at shadowfax0824@aol.com
In the 70's,the bone phone was born.A flexable tub worn around the neck,one side houses the batterys.the other houses the controls.HAS NO SPEAKERS NOR HEADPHONES! sends a signal into your iner ear.
IF anyone has any more info,or knows where I can get my hands on one PLEASE contact me at shadowfax0824@aol.com
ThankyouAd No.: 3053 - Subject: COSSOR 479AC/E & MURPHY A72 - Posted on: 11/14/02
Reply to: Martyn Rogers at martn@radio42.freeserve.co.uk
I need circuit diagrams etc for a Cossor 479AC/E aprox.1946.
I need a Tone control knob to complete the restoration of a Murphy A72 (fig 616 radio radio)Ad No.: 3051 - Subject: Watkins Scout - Posted on: 11/12/02
Reply to: Dave Seddon at seddon_@ntlworld.com
Does anyone have a circuit diagram for a Watkins Scout guitar amp.Ad No.: 3049 - Subject: Bush DAC90A output transformer. - Posted on: 11/11/02
Reply to: Leon Crampin at leoncrampin@hotmail.com
Does anyone have a spare DAC90A output transformer for sale or swap?Ad No.: 3048 - Subject: PYE TRANSISTOR RADIO - Posted on: 11/11/02
Reply to: John at etlaif@netzero.net
Rectangular w/ lw.mw.sw,vhf bands. Tuner runs horizontally along top, approx. size 14 inches wide 10 inches high and 3-4 inches deep. Grey material covering speaker, PYE logo in bottom right (ithink) corner--pre 1960.Ad No.: 3047 - Subject: Garrard 301/401 - Posted on: 11/11/02
Reply to: nigel vernon at nigelj47@aol.com
Wanted garrard 301 or 401. Must be in excellent condition and housed in a substantial plinth. Preferrably with sme armAd No.: 3046 - Subject: Ministry "Loxon" Manual binders - Posted on: 11/11/02
Reply to: Alan Hulme at lanc@ahulme682.fsnet.co.uk
I'm looking for original "Loxon" binders, as used for many, many years by various Branches of the British Armed Forces to bind technical manuals in. They are typically made of stiff brown card, with a fabric covered spine and the contents are held together by laces to facilitate removal and replacement of individual sheets. The subject matter of the manual was usually printed onto gummed paper and stuck to the front cover. There is usually a Manufacturers label gummed to the inside front cover (Hunt and Broadhurst Ltd, Oxford). They come in various sizes. I'd like to get hold of surplus binders, contents immaterial as long as the binder is sound. If anyone has an unwanted stash in the loft or garage, please tell me about it. Thanks in advance! Alan Hulme.Ad No.: 3045 - Subject: General Coverage Receivers - Posted on: 11/11/02
Reply to: Ian Jones at woolrich.jones@virgin.net
Wanted - in good condition - TRIO R2000 or FRG 7700 general coverage receiver.Ad No.: 3044 - Subject: Denco Coils - Posted on: 11/10/02
Reply to: Ian Jones at woolrich.jones@virgin.net
Desperately trying to obtain sets of the old Denco coils - IFT and Aerial.Ad No.: 3043 - Subject: 1948 Practical Wireless - Posted on: 11/10/02
Reply to: Simon Saunders at ssaunders@ntlworld.com
Does anyone have the Jan and Nov 1948 issues of Practical Wireless for sale - please emailAd No.: 3042 - Subject: Taylor Instruments Scope - Posted on: 11/10/02
Reply to: Simon Saunders at ssaunders@ntlworld.com
I would like to buy a Taylor Instruments Model 30 Oscillograph if anyone has one to offer - please email.Ad No.: 3040 - Subject: BUSH TR82 - Posted on: 11/08/02
Reply to: Kevin Daly at kevin.daly1@btinternet.com
Wanted a Bush TR82 to go with my Morris 1000, if you have one you wish to part with please let me know including model and colour scheme, I am located in Watford, my email is kevin.daly1@btinternet.com Thanks KevinAd No.: 3035 - Subject: Bush sales literature/brochures - Posted on: 11/07/02
Reply to: Mike Izycky at mjizycky@hotmail.com
I'm looking for sales literature from both the pre- and post-war era, not only to add to my collection but also as research material for a future website. I'm particularly interested in obtaining a 1937-38 model year catalogue (covering the 40-series models) and a 1940 model year catalogue (covering the 70-series sets). Also individual model brochures covering the radiograms, and sets prior to 1935 also wanted: depending upon the item and condition I will pay up to £40 for these.
Post-war information is particularly wanted too (especially radiograms), from 1946 to 1950 and 1955 onwards.
Regards, Mike.Ad No.: 3033 - Subject: Bush VTR330 diagram/spares - Posted on: 11/07/02
Reply to: Mike Izycky at mjizycky@hotmail.com
I'm looking for a chrome surround and volume control for this radio - mine has suffered at the hands of a well-intentioned repairer! Failing that, either a scrap set or the surround from a TR130/TR230 would do at a push.
I'm also looking for a circuit diagram for this set.
Thanks in advance, Mike.Ad No.: 3032 - Subject: Repanco coils - Posted on: 11/06/02
Reply to: P.Goulding at paul38g@ntlworld.com
Wanted Repanco DDR2 and DRM3 coils for radio project, can anyone help or do you have any details of these coils/equivilants.Look forwards to hearing from you.Regards PaulAd No.: 3031 - Subject: Wanted : PYE PF8 pocketphones - Posted on: 11/06/02
Reply to: Paul Coleman at paulcoleman70@hotmail.com
Wanted : PYE PF8 pocketphones (one or more). UK based. Cash waiting.Ad No.: 3028 - Subject: crystal detectors - Posted on: 11/04/02
Reply to: Ian Sanders at ilsande@at